http://doc.astlinux.org/ 2012-05-17T03:19:35-05:00 http://doc.astlinux.org/ http://doc.astlinux.org/lib/images/favicon.ico text/html 2012-05-12T07:43:32-05:00 Michael Keuter http://doc.astlinux.org/userdoc:board_jetway_nf96fl-525?rev=1336826612&do=diff AstLinux Board Type: * “geni586” (VGA video console) * “geni586-serial” (19200 baud serial console) Complete System Recommended Options: * Daughterboard: 3x 10/100/1000 Intel LAN Module * Memory: 240-pin DDR2 667/800 DIMM 2GB (or 2x 1GB sticks) * Flash Drive: Emphase Industrial S1 SATA (or 44-pin IDE) Flash Module 2 GB * Case: * No PCI Expansion Card Support * M350 Universal Mini-ITX Case * AC Adapter (brick): AC Power Adapter 60W, 12V, 5A * Fan (optional)… text/html 2012-05-09T16:36:31-05:00 Michael Keuter http://doc.astlinux.org/userdoc:tt_ast_startup?rev=1336599391&do=diff Since Asterisk 1.6.0 there is a config file cli.conf, where you can add CLI commands, which will be executed, when Asterisk starts. With the originate command you can also trigger a “call” at startup. A call to a local dummy extension can trigger a context, where you can e.g. initialize custom lamp states (from a database) or something else. text/html 2012-04-25T21:55:13-05:00 Lonnie Abelbeck http://doc.astlinux.org/userdoc:tt_ipsec_vpn_apple_ios?rev=1335408913&do=diff The popular Apple iOS platform has limited VPN options, one of which is IPsec (Cisco) which uses IPsec + XAuth. IPsec + XAuth with certificates is supported in AstLinux 1.0.3 . Apple iOS 5.1 or later is recommended, iOS 4.2 has been shown to work with the settings described below, except NAT Traversal is not supported in iOS 4.2 . text/html 2012-04-25T18:40:27-05:00 Lonnie Abelbeck http://doc.astlinux.org/userdoc:documentation?rev=1335397227&do=diff New Installation Upgrade from 0.7.x to 1.0.x Upgrade from 0.6.x Upgrade from 0.4.x Sounds Packages Network and System Configuration Asterisk Configuration Changes from 0.7.x to 1.0.x Changes from 0.6.x to 0.7.x Changes from 0.4.x to 0.6.x