Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
userdoc:general-config [2014/05/27 05:37]
droemel created
userdoc:general-config [2014/05/27 05:38]
droemel
Line 9: Line 9:
 {{:​userdoc:​filesystem.png|}} {{:​userdoc:​filesystem.png|}}
  
-==== Config files ==== 
 ===== Firewall ===== ===== Firewall =====
 AstLinux uses [[http://​rocky.eld.leidenuniv.nl/​|Arno'​s IPtables Firewall]]. ​ The default configuration files may be found in /​mnt/​kd/​arno-iptables-firewall. !!Do not edit these files!!! ​  ​Either use the web interface or copy variables you wish to set from the firewall.conf file into the /​mnt/​kd/​rc.conf.d/​user.conf file.  The web interface should handle most use cases and is the recommended method. AstLinux uses [[http://​rocky.eld.leidenuniv.nl/​|Arno'​s IPtables Firewall]]. ​ The default configuration files may be found in /​mnt/​kd/​arno-iptables-firewall. !!Do not edit these files!!! ​  ​Either use the web interface or copy variables you wish to set from the firewall.conf file into the /​mnt/​kd/​rc.conf.d/​user.conf file.  The web interface should handle most use cases and is the recommended method.
 +
 +===== Asterisk Configuration =====
 +
 +Almost all configuration of Asterisk can, and should, be carried out via the Edit tab of the GUI. If you are familiar with traditional installations of Asterisk, **do not edit the files in ''/​etc/​asterisk'',​ the traditional location of Asterisk ''​.conf''​ files**. If you want to edit the ''​.conf''​ files without using the GUI, the majority of them are located in ''/​mnt/​kd''​.
 +
 +Astlinux is designed to minimize writing to its storage media, in order to extend hardware life. For that reason, the Asterisk configuration files in the traditional location of ''/​etc/​asterisk''​ are in fact symlinks.
 +